How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have to follow a series of unique steps to add a second ignition key. This requires an electronic handheld computer, referred to as Tech-2 which is to be used by the dealer. Then the transponder is replaced and a key are required to be purchased.
It is an excellent idea to rotate your keys in order that one does not get damaged faster than the other. This will also ensure that your keys remain in top shape.
Replacement Case
The new key fobs are not like the older Saab keys. They're equipped with electronic devices that make it difficult to duplicate. That has made car theft much more difficult than it was just a few years ago. It has also made it more expensive to replace keys lost.
Every owner of a Saab 9-3 must have at a minimum two functioning keys. It costs a fortune to replace a lost key, as it requires replacing the CIM module, as well as programming the locking cylinders. Dealers usually charge between $100-$200 to do this.
There are ways to cut down on these high costs. Some parts providers will use the code of an old key to cut a new metal blade at a fraction the cost of the dealer. The key must, however, be the same as the original one in order to function within your car.
Follow these steps to replace the case. You'll require a flathead and patience. Using the screwdriver, slowly break the plastic and separate the emergency key from the case. Once you have the case open, remove the electronics and place them inside the new case. Put the correct key and badge into the case.
Replacement Battery
The replacement battery for the Saab 9-3 is a low-cost component that can be replaced easily and quickly. This YouTube video from Cyclone Cyd demonstrates how to replace the remote fob battery in just four easy steps. This tutorial is suitable for any modern-day saab key fob however the procedure might differ slightly.
This button is usually placed close to the Saab logo on the back of the fob. The button is usually found on the back of your fob close to the Saab Logo. Next, use a flathead screwdriver to insert into the tiny hole in this button. This should be enough to open the fob case to allow you to change the battery.
Once you have installed the new CR1632 batteries, you can reassemble your remote key fob. Then, you can program it into your car. The entire process should not take more than an hour or less. It is a very simple procedure that doesn't require any special tools.
The process is a bit more complicated if you've lost your key, but it's possible. The dealer will have to read the car's VIN and then order a replacement key blade and a TWICE module with the exact unique code. Then, they'll be required to cut the replacement key and then program it using a new software tool called MDI.
Key Replacement Fob
The key fob is a device that locks and unlocks your car, it's got a battery inside. The batteries are able to last for and will eventually expire. This is a common problem that occurs with all vehicles and the good thing is that you can replace the batteries in a majority of key fobs without replacing the whole case. Amazon sells fobs for replacement that already have all the electronic components installed. You can simply pop the case open and replace the batteries. It is important to keep in mind that you will need to remove the emergency key first. you can do this by putting the screwdriver of a small flathead into the slot found in the middle of the case. Use the screwdriver to move around the case, and it will split open, making it easy to remove.
If you're planning to replace your keys, be sure to have a spare in your possession. This can save you a lot of money. If you have spare keys, you can have the dealer cut a new key and program it to the car, which is cheaper than replacing the entire key fob.
It is possible to add another key to your car If you don't already have one, but it will require lots of research and effort. It costs around a hundred dollars to add a second car key. The computer in the car must also be programmed. Professionals can do this however, it's a costly option.
Replacement Ignition
The current SAAB 9-3 features a more sophisticated alarm system built around a key code. If you lose only one key, it may be expensive to add another one, as the car has to have a specific computer installed and be programmed to accept a brand new key. Dealers can charge hundreds of dollars to program an additional key when they are not able to do it.
If you've lost the only working key and a dealer is able to replace your car's computer (known as the CIM or SAAB TWICE) to make the replacement, and will charge you a premium price for it. We can reprogram the existing EEPROM of your car's computer so that it's ready for an additional key. This will save you more than 50% off the cost you pay the dealer.
If Read Alot more 've been a faithful owner of a 03-11 SAAB 9-3, you probably have noticed that the ignition switch isn't the most durable. They can be extremely sticky, and the buttons can be removed from them every now and then and you should think about buying a new one if the one you have isn't working properly. It's good to know that replacing the ignition key isn't as difficult as it sounds and is fairly easy to do with the right tools.